Dryzone Mould Remover and Prevention Kit (3 x 450ml spray) – The definitive long-term solution to Mould. Dual-Action Mould Remover & Sanitiser Spray.

FREE Shipping

Dryzone Mould Remover and Prevention Kit (3 x 450ml spray) – The definitive long-term solution to Mould. Dual-Action Mould Remover & Sanitiser Spray.

Dryzone Mould Remover and Prevention Kit (3 x 450ml spray) – The definitive long-term solution to Mould. Dual-Action Mould Remover & Sanitiser Spray.

RRP: £99
Price: £9.9
£9.9 FREE Shipping

In stock

We accept the following payment methods


You can find Dryzone products at Builder Depot online, like the damp-proofing cream that forms a water-repellent foam for quick and easy damp control. The Dryzone System is a range of products designed to eliminate rising damp and allow easy renovation of damaged interior walls. The Dryzone System range of products is designed to enable you to eliminate rising damp in these situations and renovate the interior walls that have been effected by it.

It is a biocidal sanitising solution that is designed to kill mould spores and prevent the regrowth of mould on cleaned surfaces.Dryzone Damp-Proofing Cream is part of the Dryzone System for renovating internal walls suffering from rising damp. Any salts that are still present in the building materials of the wall can migrate into the new plaster coat and symptoms of damp may reappear. As with all remedial damp-proofing systems, it is necessary to remove and replace any salt-contaminated plaster. The step-by-step guide on this page outlines how to use Dryzone to damp-proof a standard brick wall. You can change your choices at any time by visiting Cookie preferences, as described in the Cookie notice.

Kit components: 2 x Dryzone Mould Eliminator 450ml, 1 x Dryzone 100 Mould Sanitiser 450ml, 1 x Microfibre cloth, 1 x Pair of protective rubber gloves.Easy to use – Treat mould affected surfaces in under 30 minutes with little to no scrubbing, depending on severity of infestation. Once a wall has been treated, it will begin to dry out but if the wall has been contaminated by groundwater salts then complications can arise, often leading to the appearance of damp patches, on an otherwise dry wall.

It is possible, with the use of dry-jointing techniques, to complete the replastering process from start to finish within 24 hours, making this specification ideal for situations where occupants/tenants need to re-enter the room as soon as possible.Older pressure injection techniques for treating rising damp are time consuming, complicated and expensive. However, it was still used in conjunction with an industry standard sand:cement replastering system that was slow and expensive to install, was unpopular with homeowners and heritage bodies and could often result in a cold wall surface that could be vulnerable to condensation. For extra peace of mind, it is recommended to decorate and maintain your newly-refurbished wall with Dryzone anti-condensation products. The dual-action system uses Dryzone Mould Eliminator to shift mould and mildew before application of Dryzone 100 Mould Sanitiser to limit mould regrowth. Some mention that it works instantly, the smell isn't that bad, and it makes the air fresh, while others say that the smell can be a little bit intense.

Dryzone was the very first DPC cream and revolutionised the market when it was launched in the year 2000. The company was established in 1983 to produce products for the refurbishment of existing buildings and is based in Horsham. Proven to work in situation where the wall is: Highly saturated, Cold or warm, Very porous, Of high or low alkalinity.

When treating rising damp, it is important to use a high-quality product that is capable of a level of performance as close as possible to a physical DPC. Full instructions for installing Dryzone Damp-Proofing Cream can be found in the Dryzone datasheet on the ‘downloads’ tab of this page. Dryzone damp-proofing cream has also been tested independently by the British Board of Agrément (BBA), UK member of the European Union of Agrément. Independent tests demonstrate that Dryzone provides a more effective barrier to rising damp than competing products. Once Dryzone is installed it uses the moisture contained in the damp wall to diffuse where it is most needed before curing to form a water-repellent resin.

  • Fruugo ID: 258392218-563234582
  • EAN: 764486781913
  • Sold by: Fruugo

Delivery & Returns


Address: UK
All products: Visit Fruugo Shop