YOULEY Portable Neck Fan, Hands Free Bladeless Personal Fan 360° Bendable Head Fans Cooling USB Rechargeable Mini Fan 3 Speeds Hanging Wearable Neck Fans for Home Indoor Outdoor Travel Sports (White)

£6.495
FREE Shipping

YOULEY Portable Neck Fan, Hands Free Bladeless Personal Fan 360° Bendable Head Fans Cooling USB Rechargeable Mini Fan 3 Speeds Hanging Wearable Neck Fans for Home Indoor Outdoor Travel Sports (White)

YOULEY Portable Neck Fan, Hands Free Bladeless Personal Fan 360° Bendable Head Fans Cooling USB Rechargeable Mini Fan 3 Speeds Hanging Wearable Neck Fans for Home Indoor Outdoor Travel Sports (White)

RRP: £12.99
Price: £6.495
£6.495 FREE Shipping

In stock

We accept the following payment methods

Description

Given that this fan is of the ‘personal’ variety, don’t bank on it cooling a whole room – even a small one – and certainly don’t bank on it purifying anything other than the air immediately around you. But if you’re after a personal high-end fan-cum-purifier that performs well and looks the part, then this one is a worthy, albeit pricy, contender.

Type: Bladeless | Speed settings: 3 | Battery life: 2.5 to 7 hours | Battery type: 1800mAh | Dimensions: 20.7 x 22.2 x 5.8 cm | Weight: 225g What we like To summarize, an Ender 3 fan upgrade delivers a much quieter printing experience, improves cooling performance, and allows you to print more complex prints with fewer supports.We've also used the heat setting during cooler months and found it to warm up the room nicely. However, only the bottom half of this tall unit functions as a heater, so it feels a bit bulky when only using that setting. The power consumption according the manufacturing data is 2.5 kW . The power coefficient is approximately 0.88 for air at 60 o C according the chart. The correct power consumption should be The pressure coefficient for air at 180 o C is approximately 1.55 according the chart. The correct pressure used in the manufacturing data sheet should be We also tested 15 fans of these fans in our own homes for over six months. This testing not only helped us evaluate each fan's long-term performance but also allowed us to note how useful these fans were in real-world settings.

It requires two 40 x 10 mm or 50 x 15 mm fans that blow air via two ducts on either side of the nozzle – it’s a cooling beast that might be a little overkill as an Ender 3 fan upgrade but will have you covered for all filament types, projects, and ambient temperatures. Fang: Developed by Thingiverse maker mr-cal, the Ender 3 Fans borrows the same basic dual-duct design as the Petsfang and works as both a classic Ender 3 and Ender 3 Pro fan upgrade. There are quite a few options when it comes to fan size (40 x 10 mm, 40 x 20 mm, or 50 x 15 mm); simply make sure you choose a suitable mounting system. Regarding the fan’s effectiveness, while testing, we noted that it employs a direct flow and feels most cooling when it is relatively close up, with the airflow pointed directly at you. For example, while testing the airflow from different distances, we noted it was most cooling from 6 to 8 feet of its direct flow. Outside the direct flow (while the fan was stationary or oscillating), we could not feel it. So, if you are looking for a fan multiple people can feel in different parts of the room, this might not be the best option.Aside from the noisy mainboard, much of the noise comes from the fans dotted around the printer. An Ender 3 fan upgrade can drastically reduce the decibel output, a must-have quality-of-life improvement if you’re a regular user. Better Bridging, Overhangs, and Overall Print Quality The pressure coefficient is approximately 1.15 for air at 60 o C according the chart. The correct pressure in the manufacturing data sheet should be We also appreciated the ability to select the airflow direction (in or out) of each fan individually. The unit also features three speed settings and five temperature settings (from 60 to 80 degrees), thanks to its built-in thermostat. And while this window fan is not the most powerful fan we tested, we felt the airflow up to 20 feet in front of it, as well as circulating the air around the room.

We updated this guide on 6th September, 2023 to ensure everything was up to date, and still the very best of the best. The fan must be selected for volume flow 1.2 m 3 /s (and whatever the pressure loss in the system is). Pressure Head While using this fan at home for over six months, we felt that it definitely made a difference in keeping a room cool and preventing it from becoming stuffy on hot days. When used in the window, we found it useful to be able to operate each of the two fans separately, so one was bringing air in, and the other was pulling air out. However, we felt that the temperature settings on this fan were confusing, (especially since it is not an AC with a cooling feature), but the low-to-high speed setting is pretty straightforward and useful. When the weather was cooler, we continued to use it as a standalone fan on the floor to keep us cool after workouts. We've noticed no changes in the performance or appearance of the fan during this time. Decide the correct air volume and pressure for choosing a fan from the manufacturers data. Decide the power consumption.

As the fan sits inside the mainboard casing, you have a bit more freedom when it comes to fan size – 40 x 10 and 40 x 20 mm, or you can install a 3D printed mainboard cover extension to use a larger fan. Note! - the volume flow through a fan is constant as long as the physical dimensions and the speed of the fan are not changed. The amount of air (mass) passing through the fan varies with the air density and the air density depends on the temperature (as long as the pressure is constant). For clarity and easier navigation, we’ve divided our Ender 3 fan upgrade recommendations into four sections, one for each of the printer’s four main fan types. Ender 3 Part Cooling Fan Upgrade

The icing on the cake is that it will run from the supplied mains adaptor or from a USB power bank. Either way, power consumption is low, making it one of the more frugal options out there. It’s a slight pain to put together and we’re not fans of the cheap-feeling remote, but this is a great fan that will help you to sleep easily. After testing the Dyson Pure Cool Air Purifier and Fan for over six months, we've continued to appreciate its cooling and air-purifying features and sleek, stylish design. This tower fan doubles as an air purifier (with HEPA filter) and claims to remove over 99.97 percent of pollutants and allergens as small as 0.3 microns. It also offers a blade-less design, a remote control, a nine-hour timer, an easily removable filter, and 70-degree oscillation.

Why you should trust us

To compile this list, we tested 31 fans in various styles and sizes at The Labin Des Moines, Iowa. First, we studied the air speedof each fan, looking at how many speeds the fan offered, how to control them, and if the speed designation lived up to its performance. We also measured the speed with an anemometer, recorded the results, and compared them to the manufacturer's claim, if listed. Our testers then evaluated the designof each fan, looking at factors including oscillation, adjustability, bladeless design, smart features, cord length, multiple color options, and more. Next, we evaluated the portability, noting if the fan had handles or an ergonomic design that made it easier to carry with one hand as well as its sturdiness and footprint to determine its optimal placement. To determine its effectiveness, we taped a spot on the floor directly in front of the fan at a distance of 6 inches, 6 feet, and 20 feet and assessed the airflow at the highest setting, both in front of and to each side of the fan. With all of these results in mind, our testers finally looked at the price of the fan and assessed its overall value.



  • Fruugo ID: 258392218-563234582
  • EAN: 764486781913
  • Sold by: Fruugo

Delivery & Returns

Fruugo

Address: UK
All products: Visit Fruugo Shop