The MX500 has been out several years, and while it initially launched with a single 1TB capacity, this all has changed with the lineup now filled out from 250GB to 2TB. Build quality is on par with the best SATA has to offer, and drive endurance is rated at a solid 700TBW or 383GB per day for five years. Then the disk cloning process will begin. Do not interrupt the cloning process until it is finished. When choosing a hard drive or a solid-state drive, hard drive capacity is a necessary factor to be considered since larger hard drive enables you to save more files.

To sum up, as for Crucial MX500 vs BX500, this post has shown their differences in 5 aspects. In my opinion, the Crucial MX500 SSD is better than Crucial BX500 SSD since it has better performance and provides a longer warranty. SSDs have become one of the most popular devices among the storage markets and SSDs’ options are increasing. They are a lot of famous SSD manufacturers around the world, such as Samsung, Seagate, Crucial, Toshiba, etc. So, if you want to get an excellent SSD for your PC, then you should keep these two in mind. However, whereas both the SSDs offer amazing performance, some differences between them may create confusion about which one to choose. But to clearly understand which SSD will offer you the most value, we will need to dig deeper. Hence, let’s take a closer look at who will win the fight between Samsung 870 EVO vs Crucial MX500. Overview of Samsung 870 EVO SSD The Crucial MX500 is the first Crucial’s drive based on Micron’s 64-layer 3D TLC NAND and it is the second generation of Crucial’s mainstream MX series using TLC NAND. The Crucial MX500 SSD is available in both 2.5 inch and M.2 2280 form factors. It comes with four different storage capacities and can reach up to 2TB.Simply put, both the Samsung 870 EVO and Crucial MX500 have a speed limit of 600MB/s as both use the SATA protocol. However, Samsung 870 EVO SSDs offer 530MB/s sequential writing speed, which is 20MB/s more than the Crucial MX500 SSDs. Also, Samsung 870 EVO is more expensive than the Crucial MX500, which is also a factor to consider.

To clone OS from HDD to SSD, you can use a clone tool. Thus, the professional SSD clone software – MiniTool ShadowMaker is recommended, which enables you to upgrade hard drives without data loss.Performance in sequential workloads is easily able to hit the peaks of SATA - CDM showed 546 MB/s read and ATTO topping 526 MB/s. PCMark 10 showed steady improvement over the BX series for the MX500 as a daily driver, but not quite as good as the Barracuda SSD from Seagate. That said, Price/Performance is fantastic for the MX500, taking the top spot in our current charts for all SATA drives tested.