This module contains - 1.M.2 Carrier; 2.Thermal Pads; 3.M.2 3.5" Module Bay; 4.Capacity Label sheet for M.2 Carrier When I got my PS5 I decided to go with a 2TB m.2 drive and an ASUS ROG Strix enclosure as external storage for my PS4 games. The enclosure was nice, and everything copied quite fast, but the drive would not stay connected during rest mode, forcing me to repair the drive every time the PS5 booted up, even with USB Power set to Always On. Researched the problem and discovered that, after some users did a ton of testing, only enclosures that use the ASM2362 control chip are fully compatible with the system for some reason, which the ASUS enclosure did not have. This one, it turns out, does! And I'm happy to say that after swapping the M.2 drive to this enclosure, it works perfectly with the PS5 and I have yet to have any disconnection problems.

M.2 NVMe SSD Enclosure Adapter, USB 3.1 Gen 2 USB Type C M.2 NVMe SSD Enclosure Adapter, USB 3.1 Gen 2

Generally if the drive is readable I'll boot off a custom WinPE disk I built and run USMT to salvage the user profile data to a compressed MIG store. Then I'll replace the drive or laptop, re-image, and restore the salvaged profile. So the faster the drive is the faster I can complete these tasks. Which makes users happier. I've been using a M2 Sata enclosure, but I also have 2.5" external cables that let me plug a 2.5" directly into a USB port.https://www.dell.com/support/article/us/en/04/sln313880/dell-precision-workstation-5820-7820-7920-pcie-nvme-flexbay-slots-will-not-detect-sata-sas-drives?lang=en M.2 storage devices are classified numerically based on performance. The higher the Class, the faster the overall performance: Dell Precision Workstation 5820 / 7820 / 7920 PCIe NVMe FlexBay Slots Will Not Detect SATA / SAS Drives Next is the fastest USB thumb drive I own. These predate me having the USB External M2 adapters. So I used to use them for salvage. Most of the time now they run various bootable things. But the read/write speeds are still impressive for a true USB Thumb drive. Sandisk Extreme 64GB (CZ80) Don't forget that having ultimate external drive performance won't help the source drive be any faster than whatever its interface is limited to.

SABRENT M.2 SATA SSD to SATA 2.5 Enclosure Adapter, M.2

The last enclosure I bought was the TDBT M.2 NVMe enclosure. Like the Shinestar this also uses the JMS583, and despite the inclusion of a larger case, and a heat spreader with thermal pad, it runs slightly hotter than the Tripp-lite unit, but not uncomfortably so. I assume the heat spreader is doing its job and spreading the heat, and the larger enclosure has more surface area to absorb/dissipate heat. When you install the kit 750-ADBF necessary to upgrade to the M.2 NVMe SSDs, you will wind up with two (2) front flex Bay positions that will support a M.2 module (Kit 575-BBSH). What I found was that you now have two (2) flex bay positions that will not recognize SATA or SAS Hard drives. (I had three SATA hard drives installed and one empty flex bay position). Now I can only use two of the flex bay positions for the SATA hard drives. If you install a SATA HDD module in one of these front flex bays configured for M.2 module, you get a flashing amber LED on the flex bay "door" and the SATA drive is not shown in Computer Management.SIIG Full Speed M.2 M Key Nvme SSD to PCIe Adapter, PCI Express X16 Card with Heatsink, Supports Windows 7/8/ 10, Supports 2230, 2242, 2260, 2280 Form Factor M.2 SSDS

M.2 SATA SSD Docking And Cloning Icy Box External USB3.0, M.2 SATA SSD Docking And Cloning

I don't have any of the benchmark screen shots, I'd have to grab a virgin drive and test to snag them. BUT under heavy load it would disconnect 10/10 times after only a few seconds. Transferring files to and from the drive at the same time will trigger this, as well using it as a cache while video editing. The included cables were shorter than the ICY BOX and of poor quality. I actually couldn't get the included USB 3 cable to work at all unless I held it into my computer. At this point in my life I'm guessing my USB cable counter has likely surpassed 1000 cables and I have never had to do this before. This enclosure is also the fastest of the bunch, but only by about 15-20MB/s pure sequential with large files. I've got a Shinestar NVMe enclosure, but it tops out around 1GB and I know these drives go faster when plugged directly into an M2 slot. M3X3 screw(most computers include these. These secure the Y1WJX M.2 drive carrier, or a 2.5" drive into 745TM)

Support

I actually did a bunch cause it I was a bit bored at work. I did a Sandisk Extreme 64GB, Sandisk Ultra Flare 32GB, Samsung EVO 850 1TB 2.5", Intel SSD Pro 2500 256GB SATA too. The PCIe NVMe SSD drive FlexBay has the physical data and power connector to allow a SATA or SAS drive to be physically installed. However, the FlexBay is only configured to communicate with PCIe NVMe SSDs. SATA or SAS drives installed in this FlexBay will not work due to an incompatibility with the drive controller. Cheap PNY 8GB commodity drive. Thing was so damned slow I changed it to 512GB and only ran 1 pass. Thats not a mistake, the random write tests are slow low as to not even register. RND4KQ32T16 is something like .0003MB/s. The original SATA protocol was designed to maximize the performance of platter (physical spinning) hard drives. With the proliferation of SSD drives, the SATA storage management protocol has become a limiting factor. The NVMe (Non-Volatile Memory) protocol has been designed for solid state drives and uses the PCIe bus for optimal performance. An M.2 drive may support SATA or PCIe/NVMe but not both. Depending on the drive, and what the computer can support, not all M.2 drives work in all computers.